Rubber Sheets in Faridabad
Gayatri Rubber & Fibre Plast Ind., Ahmedabad 
These rubber sheets exhibits excellent physical properties including a moderate abrasion and temperature resistance. It can be used for service temperature up to 800 C. However, it has poor resistance to petroleum based fluids, ozone and sunlight
Size (width) : 1 m To 2 m
Thickness : 3 mm to 50 mm
Paras Rubber Industries, Ghaziabad Natural Rubber Sheets can operate under extreme weather conditions, resistant to many acids, alkalis and salts, resistant to abrasion, wear, has low compression set and high resilience
Colors: Black, white, beige, custom
Heat Resistant: Max. Continuous -75o C, Max. intermittent: 105o C
Tensile Strength: Up to 200 kg /cm sq.
Elongation Strength: Up to 800 %
Usage: skirt-board sheets, bridge bearing pads, shot blasting sheets, Chute Lining, High Tensile Tan Gum sheets and commercial sheets with & without cotton insertion
Aryan Rubber Industries, Delhi We offer various types of Reclaim Rubber including Butyl Reclaim Rubber Sheets, Natural Reclaim Rubber, Whole Tyre Reclaim Rubber, EPDM Reclaim Rubber
It is widely used in manufacturing of automobile tyres and tubes as well other rubber products. By adding reclaim rubber with the virgin, it reduces the production cost of the product as well as improves the mechanical strength of the product.
Jyoti Rubber Udyog India Limited, Delhi This type of rubber sheet if used between flanges and similar joints subjected to water & air pressure. It is manufactured out of Rubber compound of high quality Natural or Synthetic rubber or a blend thereof. Unless otherwise specified, colour shall be off-white having cloth marked finish on both surfaces.
The reinforcement fabric used shall have a minimum breaking load of 120 N/cm widths for both warp and weft direction. SBR Rubber Sheets ofers good abrasion resistance, excellent impact strength, very good resilience and a high tensile strength. It also ages well and delivers good compression set and water resistance.
Colour : Black, Custom Colour
Density : 1.3 - 1.8 g/cm3
Hardness : 50 - 75 shore A
Tensile Strength: 1.8 - 10 Mpa
Elongation : 200% - 400%
Temperature: -30oC to 90oC
Material: NBR, SBR, CR, NR, EPDM, FKM
Features: General industrial and technical application, Good abrasion resistance, durable and soft
close
Post Your Requirement
{{inquiryMessage}}
|
